Notwendige Cookies halten den Warenkorb, deine Sprache und diese Auswahl am Laufen. Mit deiner Einwilligung nutzen wir außerdem Analyse-Cookies, um zu sehen, welche Seiten helfen, und Marketing-Cookies, um unsere Anzeigen zu messen. Mehr in der Datenschutzerklärung und der Cookie-Richtlinie.
Bewertungen
Labore und Zahntechniker erzählen, wie das Kit mit ihrem Artikulator und ihrer CAD-Software funktioniert. Die Zitate erscheinen im Originalwortlaut, und jede Übersetzung ist gekennzeichnet.
4,9 von 5
Eine Auswahl aus den Bewertungen weiter unten.
Bewertung im Fokus
Prosthodontics Resident at Harvard School of Dental Medicine
Vereinigte Staaten
Brilliant design with strong customization (nine site options for different cases) and the mounting calibration, which should improve accuracy!
Zahntechniker
Italien
I've finally found a simple, effective system for printing models through the Model Creator module in Exocad, with a beautiful and extremely precise design. The models are lightweight and reduce resin consumption. They don't have bulky or outdated bases, and I don't have to change anything in my workflow — I can keep printing horizontally, with the added flexibility of managing the model base and the digital analogs. Fully approved!
Full Master Pro Instructor, Blender for Dental
Tenerife, Spanien
I had the chance to try this system and I have to say it is truly excellent: Antonello has bridged the gap between analog and digital with great precision. It has become a routine in our laboratory, and the results have been remarkable. Heartfelt thanks.
Zahntechniker · Pugnolab
Italien
In our CAD workflow, design is only half the job.
We were looking for a system that would let us take a real step up in the manual verification of our projects, especially for tasks requiring a highly dynamic approach, such as checking a 3D-printed bite splint.
With the new Dacos Omni, we found exactly what we needed.
Thank you, Antonello
Inhaber
Vereinigte Staaten
Game changer. No more mess, just clean, consistent, and highly accurate printed models
Certified exocad Instructor
Italien
Those who know me know I've always been a bit skeptical about systems for repositioning 3D-printed models in an articulator. But Antonello designed this one differently, and it solves two key problems. The first is articulator calibration: thanks to the Gemini Calibrator, DACOS eliminates the level discrepancies caused by uncalibrated articulators. The second is the problem of having 3D-printing pins under the model: DACOS moves the anchoring level to a zone that doesn't interfere with the result or with seating the model on the articulator. It's one of the few systems on the market I really like.
Zahntechniker und Keramiker · 360 Estudio Dental
Mexiko
A predictable, practical, clean, and simple-to-use work system.
Zahntechniker
Italien
DACOS Omni — a great ally for digital prosthetic production. In my production chain I find the DACOS Omni very useful, if not indispensable, for transferring from digital to analog — onto my physical articulator — the real spatial position of the dental arches that the clinician registered with the intraoral scanner. From that registered position I can start an accurate design of my restoration, one that is esthetic and, above all, functional. With this system, simply by using magnets glued into the dedicated recesses prepared in the 3D-printed models, the models anchor to the articulator, where I can check and finalize my prosthetic work at its best — with no model adaptations and no plaster.
Zahntechniker · Laboratoire Miot
Frankreich
Good system. I just have to select a wider fit at the design stage, otherwise the models don't seat correctly.
Filtere nach Artikulator, CAD-Software oder Land.
Certified exocad Instructor
Italien
Those who know me know I've always been a bit skeptical about systems for repositioning 3D-printed models in an articulator. But Antonello designed this one differently, and it solves two key problems. The first is articulator calibration: thanks to the Gemini Calibrator, DACOS eliminates the level discrepancies caused by uncalibrated articulators. The second is the problem of having 3D-printing pins under the model: DACOS moves the anchoring level to a zone that doesn't interfere with the result or with seating the model on the articulator. It's one of the few systems on the market I really like.
Founder of Dental Makers
Italien
As experts in 3D printing, we highly recommend DACOS technology — currently the only system able to guarantee the positioning of 3D models in the articulator with true vertical precision, without requiring very tall, complex 3D prints or special calibrations.
Certified Blender for Dental Instructor
Italien
A systematic, crazy way of articulating from digital to analog — thanks to Antonello Croce for this incredible idea. So far, I believe it's the best way to articulate models.
Zahntechniker
Italien
I've finally found a simple, effective system for printing models through the Model Creator module in Exocad, with a beautiful and extremely precise design. The models are lightweight and reduce resin consumption. They don't have bulky or outdated bases, and I don't have to change anything in my workflow — I can keep printing horizontally, with the added flexibility of managing the model base and the digital analogs. Fully approved!
Full Master Pro Instructor, Blender for Dental
Tenerife, Spanien
I had the chance to try this system and I have to say it is truly excellent: Antonello has bridged the gap between analog and digital with great precision. It has become a routine in our laboratory, and the results have been remarkable. Heartfelt thanks.
Zahntechniker
Italien
DACOS Omni — a great ally for digital prosthetic production. In my production chain I find the DACOS Omni very useful, if not indispensable, for transferring from digital to analog — onto my physical articulator — the real spatial position of the dental arches that the clinician registered with the intraoral scanner. From that registered position I can start an accurate design of my restoration, one that is esthetic and, above all, functional. With this system, simply by using magnets glued into the dedicated recesses prepared in the 3D-printed models, the models anchor to the articulator, where I can check and finalize my prosthetic work at its best — with no model adaptations and no plaster.
Zahntechniker
Italien
Ich war wirklich geschockt: das gefräste Provisorium aufs Modell gesetzt, und alles passt.
KOL Vita and Blender for Dental Instructor
Mexiko
A smart, plasterless articulation system that fits perfectly into a fully digital workflow. What I really appreciate about DACOS OMNI is how seamlessly it works inside exocad Model Creator, no need for a separate Model Creator.
Blender for Dental Spanish Agency
Chile
This system has changed the way I work. It allows me to transfer all my digital records with precision to my analog articulator, making my treatments more tangible and predictable than ever.
Blender for Dental Instructor
Griechenland
DACOS Model System — the premium standard in digital-analog harmony! Thanks Antonello for inventing this.
Functional Art Studio
Vereinigte Staaten
I love this system!! It has impressed me with its usefulness and predictability in digital workflows.
Mst
Österreich
I’m genuinely impressed by how professional and well thought-out this system is. Everything works smoothly and intuitively, and you can clearly feel the experience and care that went into its development. The support was excellent and the solution is extremely reliable. Highly recommended.
Zahntechniker
Italien
Fast, precise and easy to use
Zahntechniker
Türkei
I like
Zahntechniker
Litauen
the least questionable system available on the market.
Inhaber
Vereinigte Staaten
Game changer. No more mess, just clean, consistent, and highly accurate printed models
Prosthodontics Resident at Harvard School of Dental Medicine
Vereinigte Staaten
Brilliant design with strong customization (nine site options for different cases) and the mounting calibration, which should improve accuracy!
Zahntechniker · Laboratoire Miot
Frankreich
Good system. I just have to select a wider fit at the design stage, otherwise the models don't seat correctly.
Italien
The perfect link between digital and analog.
Zahntechniker
Australien
Amazing Product! Currently the best articulator system on market for transferring your digital work to your prefer articulator. Game changer for full arches cases.
Zahntechniker · Pugnolab
Italien
In our CAD workflow, design is only half the job.
We were looking for a system that would let us take a real step up in the manual verification of our projects, especially for tasks requiring a highly dynamic approach, such as checking a 3D-printed bite splint.
With the new Dacos Omni, we found exactly what we needed.
Thank you, Antonello
Zahntechniker und Keramiker · 360 Estudio Dental
Mexiko
A predictable, practical, clean, and simple-to-use work system.
Zahntechniker · Smile Soluzioni Dentali
Italien
Im Alltag nutze ich das System ausschließlich für Toronto-Brücken, und ohne viel Schnickschnack funktioniert es verdammt gut. Wenn es bei mir funktioniert, obwohl ich vor lauter Eile nie auf viele Details achte, dann ist es richtig gut. Weiter so!
Kein Bericht passt zu diesen Filtern.
Die Kits werden aus Italien versendet. Die Bewertungen auf dieser Seite kommen von Laboren in 11 Länder.
Du arbeitest in deinem Labor mit DACOS Omni? Erzähl anderen Zahntechnikern, wie es bei dir läuft. Das Formular öffnet sich auf Notion.
Bewertung schreiben(öffnet in einem neuen Tab)Externes Formular auf Notion
Sag uns, mit welchem Artikulator du arbeitest, und wir zeigen dir das passende Kit mit allem, was in der Box ist.
Sprich mit einem Zahntechniker
Fragen zu deinem Artikulator, deinem Setup oder einer Bestellung. Wir antworten auf Englisch.