In the spotlight
Ricky Huang
Prosthodontics Resident at Harvard School of Dental Medicine
United States
Brilliant design with strong customization (nine site options for different cases) and the mounting calibration, which should improve accuracy!
DACOS Omni ASA
5.0/5Direct fit for ASA Dental 5010, 5050 and 5050Plus
Duo costs USD 14.00 less than buying Light and Ultra as two kits.Which height do I need?
Price: USD 598.00
Charged in USD. Estimate at today’s ECB rate.
Prices shown without VAT. Prices in USD. Taxes and duties are shown at checkout.
Not available right now. We confirm a dispatch date by email.
Italian business with a Partita IVA? Buy without Italian VAT (reverse charge, art. 17(2) DPR 633/72). Continue in Italian
Your configured kit
Check the height above and change it if your cases need another one.
Questions before you order? Message us on WhatsApp
The pin returns to zero. The contacts you design are the contacts you verify.
Patent Pending
The DACOS Omni system, including its adapter plates, calibration method, attachment geometry, and magnet placement tools, is protected by a pending international patent application.
Protected engineering
- ShieldBase™ Geometry
- DockingMatrix™ Configuration
- TrueZero™ Calibration
Dispatched from Italy within 2 business days
Carrier estimate. Customs clearance can add time outside the EU.
- Secure checkoutShop PayApple PayGoogle PayVisaMastercardMaestroPayPal
- Invoice with every order
- Support after delivery
Plates made for the ASA Dental 5010, 5050 and 5050Plus. Install once, then every printed model seats on magnets and the pin returns to zero.
What’s inside the kit
Open the box with us before you order: every plate, the accessories and what the DACOS Hub gives you after purchase.
What’s in the box
In the boxLight (35 mm)Ultra (55 mm)Duo (35 + 55 mm)
- 1 ×Upper plate
- 1 ×Omni Pivot Base (lower plate with ball-in-bowl seat)
- 2 ×Omni GlueJet™
- 1 ×GripMag™ 50 (50 magnets, 6x3 mm)
- 1 ×Upper plate
- 1 ×Omni Pivot Base (lower plate with ball-in-bowl seat)
- 2 ×Omni GlueJet™
- 1 ×GripMag™ 50 (50 magnets, 6x3 mm)
- 2 ×Upper plate
- 2 ×Omni Pivot Base (lower plate with ball-in-bowl seat)
- 2 ×Omni GlueJet™
- 1 ×GripMag™ 50 (50 magnets, 6x3 mm)
The Duo ships plates for both heights and one accessory set.
Included digital files
- TrueZero™ calibrator (STL file, printed once)
- CAD libraries for exocad and 3Shape
Downloaded from your DACOS Hub after purchase.
Sold separately
- Blender for Dental module, sold by Blender for Dental
You also need
- A resin 3D printer and resin
- Low-viscosity cyanoacrylate for the model magnets
- Plaster and silicone for the one-time installation
- CAD software: exocad, 3Shape or Blender for Dental
Does it fit your bench?
Articulators, CAD software and printers this product works with.
| Articulators | ASA Dental 5010, ASA Dental 5050, and ASA Dental 5050Plus |
|---|---|
| CAD software | CAD libraries for exocad and 3Shape included. Blender for Dental module sold by Blender for Dental. |
| 3D printers | A resin 3D printer for your models. The TrueZero™ calibrator is printed once on it. |
| Not your articulator? |
Which height do I need?
Every DACOS Omni kit comes in three configurations. Pick by the cases your lab runs most.
Light (35 mm)
For daily crowns, bridges, veneers and ortho models. Compact models use less resin and print faster.
- Magnet to magnet: 35 mm. Upper and lower model together: 40 mm.
Ultra (55 mm)
Full clearance for implant work, All-on-X, multiple analogs and surgical models.
- Magnet to magnet: 55 mm. Upper and lower model together: 65 mm.
Duo (35 + 55 mm)
Both heights in one box: Light for daily work, Ultra for complex cases. No upgrade later.
- Light · Magnet to magnet: 35 mm. Upper and lower model together: 40 mm.
- Ultra · Magnet to magnet: 55 mm. Upper and lower model together: 65 mm.
Duo costs USD 14.00 less than buying Light and Ultra as two kits.
On your bench
Install once. From then on every case mounts on magnets, in minutes.
One-time installation
Fit the plates to your articulator once and print the TrueZero™ calibrator on your own printer.
Every case after that
Print the models with the ShieldBase™ geometry, glue the magnets, place them on the plates. No plaster.
Print the calibrator and join the two halves into one rigid block.
Mount the upper plate on the articulator’s own split cast interface.
The Transfer Fidelity System
Four parts work together so the transfer adds nothing to your error chain.
- Patent Pending
ShieldBase™ Geometry
The base of every printed model, shaped for resin printing and a repeatable seat on the plate.
- Patent Pending
DockingMatrix™ Configuration
8 magnet positions per plate and 9 combinations that clear implant analogs.
- Patent Pending
TrueZero™ Calibration
A calibrator printed once on your printer, so the pin returns to zero on your setup.
CAD libraries
Libraries for exocad and 3Shape included. Blender for Dental module sold by Blender for Dental.
Patent Pending
The DACOS Omni system, including its adapter plates, calibration method, attachment geometry, and magnet placement tools, is protected by a pending international patent application.
Protected engineering
- ShieldBase™ Geometry
- DockingMatrix™ Configuration
- TrueZero™ Calibration
What technicians say
After the review in the spotlight, reviews from labs that work with this articulator come first.
Andrea Pugno
Dental technician · Pugnolab
Italy
In our CAD workflow, design is only half the job. We were looking for a system that would let us take a real step up in the manual verification of our projects, especially for tasks requiring a highly dynamic approach, such as checking a 3D-printed bite splint. With the new Dacos Omni, we found exactly what we needed. Thank you, Antonello
Case photo shared by Andrea Pugno 
Alessio Berardi
Dental technician
Italy
DACOS Omni — a great ally for digital prosthetic production. In my production chain I find the DACOS Omni very useful, if not indispensable, for transferring from digital to analog — onto my physical articulator — the real spatial position of the dental arches that the clinician registered with the intraoral scanner. From that registered position I can start an accurate design of my restoration, one that is esthetic and, above all, functional. With this system, simply by using magnets glued into the dedicated recesses prepared in the 3D-printed models, the models anchor to the articulator, where I can check and finalize my prosthetic work at its best — with no model adaptations and no plaster.
Giancarlo Stabile
Dental technician
Italy
I was truly shocked: a milled provisional seated on the model, and everything lines up.
Case photo shared by Giancarlo Stabile 
Alfredo Salvi
Full Master Pro Instructor, Blender for Dental
Tenerife, Spain
I had the chance to try this system and I have to say it is truly excellent: Antonello has bridged the gap between analog and digital with great precision. It has become a routine in our laboratory, and the results have been remarkable. Heartfelt thanks.
Case photo shared by Alfredo Salvi 
Simone Fedi
Dental technician
Italy
I've finally found a simple, effective system for printing models through the Model Creator module in Exocad, with a beautiful and extremely precise design. The models are lightweight and reduce resin consumption. They don't have bulky or outdated bases, and I don't have to change anything in my workflow — I can keep printing horizontally, with the added flexibility of managing the model base and the digital analogs. Fully approved!
Case photo shared by Simone Fedi 
Paul le
Owner
United States
Game changer. No more mess, just clean, consistent, and highly accurate printed models
Jorge Valladares
Ceramist dental technician · 360 Estudio Dental
Mexico
A predictable, practical, clean, and simple-to-use work system.
Case photo shared by Jorge Valladares
The remake mathRun the numbers for your lab
Every number is editable. Put in yours.
Bench time recovered6.7 h per month
Occlusion remakes avoided
At your numbersUSD 3,452 per year
At your numbers, one avoided remake can cover the cost of this kit.
Assumptions: remake rates from published studies, linked below. Change them to yours. National Dental PBRN, Spear Education.
Support after delivery
Every DACOS kit is checked before shipping. If the pin does not return to zero after TrueZero™ calibration, open a TrueZero™ Verification case and we work through it with you.
- Damaged, defective or wrong items: write to us within 7 days of delivery.
- We answer every request by the next business day.
Shipping and duties
Every order ships from Italy, fully tracked. Prices are shown without VAT. Dispatched within 2 business days of your order.
| Destination | Carrier | Typical delivery after dispatch | Taxes and duties |
|---|---|---|---|
| Italy | Poste Italiane | 1 to 3 business days | IVA added at checkout. With a Partita IVA you buy without IVA. |
| European Union | FedEx | 2 to 4 business days | VAT of your country is added at checkout. No import duties within the EU. |
| United States | FedEx | 3 to 6 business days | Shipped DAP: import duties and taxes, if any, are paid to the carrier on arrival. |
| Canada | FedEx | 3 to 6 business days | Shipped DAP: import duties and taxes, if any, are paid to the carrier on arrival. |
| Rest of the world | FedEx | 4 to 8 business days | Shipped DAP: import duties and taxes, if any, are paid to the carrier on arrival. |
Questions technicians ask
Which ASA Dental models does it fit?
The ASA Dental 5010, 5050 and 5050Plus, the small red articulators, and the 5050Plus. Other ASA models, the 5032 among them, take the Flex kit, which mounts on any articulator with a mounting plate.
Light, Ultra or Duo?
Light (35 mm) suits daily crowns, bridges, veneers and ortho models and keeps models compact. Ultra (55 mm) gives full clearance for implant analogs, All-on-X and surgical models. Duo puts both heights in one box.
What is in the box?
An upper plate and an Omni Pivot Base per height, two Omni GlueJet™ tools and GripMag™ 50. The TrueZero™ calibrator file and the CAD libraries download from the DACOS Hub.
What else do I need?
A resin 3D printer and resin, a low-viscosity cyanoacrylate for the model magnets, plaster and silicone for the one-time installation, and a CAD software: exocad, 3Shape or Blender for Dental.
Which CAD software does it work with?
CAD libraries for exocad and 3Shape are included. For Blender for Dental, the module is sold by Blender for Dental.
What does TrueZero™ calibration do?
You print the TrueZero™ calibrator once on your own printer and resin. It tunes the fit of the printed models to your setup, so the pin returns to zero on your bench.
What if the pin does not return to zero?
Open a TrueZero™ Verification case and we work through it with you. Damaged, defective or wrong items: write to us within 7 days of delivery.
How fast does it ship?
Orders leave Italy within 2 business days, fully tracked. Prices are shown without VAT; in the EU the VAT of your country is added at checkout.
Completes your setup
Parts and tools for the same system. Nothing here is required to start.
