Cookie settings

Choose what we may use beyond the necessary cookies. You can change this any time from Cookie settings at the bottom of every page.

Menu

Search the site

    Coming soon

    DACOS Omni Panadent

    Direct fit for Panadent PCH, PSH and PCF

    Choose your height

    Both heights on the bench: Light for daily work, Ultra for implant cases. USD 29.60 less than two single kits.

    One height is enough? Light or Ultra alone costs USD 370.00 less.

    Duo costs USD 29.60 less than buying Light and Ultra as two kits.Which height do I need?

    Price: USD 769.60

    Prices shown without VAT. Prices in USD. Taxes and duties are shown at checkout.

    Italian business with a Partita IVA? Buy without Italian VAT (reverse charge, art. 17(2) DPR 633/72). Continue in Italian

    Pre-order today, shipping expected in January 2027

    You pay at checkout, as with any order, and we email you when your order leaves Italy.

    Questions before you order? Message us on WhatsApp

    The pin returns to zero. The contacts you design are the contacts you verify.

    • Secure checkoutShop PayApple PayGoogle PayVisaMastercardMaestroPayPal
    • Invoice with every order
    • Support after delivery

    Plates made for Panadent PCH, PSH and PCF articulators. Install once, then every printed model seats on magnets. Coming soon: pre-order now.

    Questions before you order? Ask a technician

    What’s inside the kit

    Everything in the box, before you order: every plate, the accessories and what the DACOS Hub gives you after purchase.

    Contents of the DACOS Omni Panadent Duo kit laid flat: plates and red bowls for both heights, Omni GlueJet™ tools and magnets
    Omni Pivot Base of the Panadent kit taken apart: lower plate and red bowl
    Panadent upper plate seen from the articulator side, with its metal disc

    What’s in the box

    In the boxDuo (35 + 55 mm)

    • 2 ×Upper plate
    • 2 ×Omni Pivot Base (lower plate with ball-in-bowl seat)
    • 2 ×Omni GlueJet™
    • 1 ×GripMag™ 50 (50 magnets, 6x3 mm)

    The Duo ships plates for both heights and one accessory set.

    Included digital files

    • TrueZero™ calibrator (STL file, printed once)
    • CAD libraries for exocad and 3Shape

    Downloaded from your DACOS Hub after purchase.

    Sold separately

    • Blender for Dental module, sold by Blender for Dental

    You also need

    • A resin 3D printer and resin
    • Low-viscosity cyanoacrylate for the model magnets
    • Plaster and silicone for the one-time installation
    • CAD software: exocad, 3Shape or Blender for Dental

    Does it fit your bench?

    Articulators, CAD software and printers this product works with.

    Compatibility of DACOS Omni Panadent
    Articulators

    Panadent PCH, Panadent PSH, and Panadent PCF

    CAD software

    CAD libraries for exocad and 3Shape included. Blender for Dental module sold by Blender for Dental.

    3D printers

    A resin 3D printer for your models. The TrueZero™ calibrator is printed once on it.

    Not your articulator?

    DACOS Omni Flex fits any articulator with a mounting plate.

    Which height do I need?

    Every DACOS Omni kit comes in three configurations. Pick by the cases your lab runs most.

    • Light (35 mm)

      For daily crowns, bridges, veneers and ortho models. Compact models use less resin and print faster.

      • Magnet to magnet: 35 mm. Upper and lower model together: 40 mm.
    • Ultra (55 mm)

      Full clearance for implant work, All-on-X, multiple analogs and surgical models.

      • Magnet to magnet: 55 mm. Upper and lower model together: 65 mm.
    • Duo (35 + 55 mm)

      Both heights in one box: Light for daily work, Ultra for complex cases. No upgrade later.

      • Light · Magnet to magnet: 35 mm. Upper and lower model together: 40 mm.
      • Ultra · Magnet to magnet: 55 mm. Upper and lower model together: 65 mm.

      Duo costs USD 29.60 less than buying Light and Ultra as two kits.

    On your bench

    Install once. From then on every case mounts on magnets, in minutes.

    1. One-time installation

      Fit the plates to your articulator once and print the TrueZero™ calibrator on your own printer.

    2. Every case after that

      Print the models with the ShieldBase™ geometry, glue the magnets, place them on the plates. No plaster.

    Watch the full workflow
    1. The two printed halves of the TrueZero calibrator joined into one rigid block

      Print the calibrator and join the two halves into one rigid block.

    2. Gloved hand holding the upper member of a Panadent PCF with the DACOS Omni Panadent upper plate mounted

      Mount the upper plate on the articulator’s own split cast interface.

    3. Gloved fingers locking the incisal pin of a Panadent PCF at zero above the calibrator

      Set the incisal pin at zero and lock it.

    4. Plaster spread into the red bowl of the Panadent Pivot Base, resting on the calibrator

      Seat the bowl on the calibrator and fill it once with plaster or hard silicone.

    5. Panadent PCF held closed upside down on the calibrator while the plaster sets

      Close the articulator upside down, let it set, remove the calibrator.

    The Transfer Fidelity System

    Four parts work together so the transfer adds nothing to your error chain.

    • Patent Pending

      ShieldBase™ Geometry

      The base of every printed model, shaped for resin printing and a repeatable seat on the plate.

    • Patent Pending

      DockingMatrix™ Configuration

      8 magnet positions per plate and 9 combinations that clear implant analogs.

    • Patent Pending

      TrueZero™ Calibration

      A calibrator printed once on your printer, so the pin returns to zero on your setup.

    • CAD libraries

      Libraries for exocad and 3Shape included. Blender for Dental module sold by Blender for Dental.

    What technicians say

    Read all reviews
    The remake mathRun the numbers for your lab

    Every number is editable. Put in yours.

    The remake math

    Calibrate once with TrueZero™, then mount.

    Bench time recoveredUSD 167 per month6.7 h per month
    Occlusion remakes avoidedUSD 121 per month
    At your numbersUSD 288 per monthUSD 3,452 per year

    Assumptions: remake rates from published studies, linked below. Change them to yours. National Dental PBRN, Spear Education.

    Support after delivery

    Every DACOS kit is checked before shipping. If the pin does not return to zero after TrueZero™ calibration, open a TrueZero™ Verification case and we work through it with you.

    • Damaged, defective or wrong items: write to us within 7 days of delivery.
    • We answer every request by the next business day.

    Shipping and duties

    Every order ships from Italy, fully tracked. Prices are shown without VAT.

    Carrier, typical delivery after dispatch, and taxes by destination
    DestinationCarrierTypical delivery after dispatchTaxes and duties
    ItalyPoste Italiane1 to 3 business daysIVA added at checkout. With a Partita IVA you buy without IVA.
    European UnionFedEx2 to 4 business daysVAT of your country is added at checkout. No import duties within the EU.
    United StatesFedEx3 to 6 business daysShipped DAP: import duties and taxes, if any, are paid to the carrier on arrival.
    CanadaFedEx3 to 6 business daysShipped DAP: import duties and taxes, if any, are paid to the carrier on arrival.
    Rest of the worldFedEx4 to 8 business daysShipped DAP: import duties and taxes, if any, are paid to the carrier on arrival.

    Questions technicians ask

    Which Panadent models does it fit?

    The Panadent PCH, PSH and PCF. Any other articulator takes the Flex kit, which mounts on any articulator with a mounting plate.

    Light, Ultra or Duo?

    Light (35 mm) suits daily crowns, bridges, veneers and ortho models and keeps models compact. Ultra (55 mm) gives full clearance for implant analogs, All-on-X and surgical models. Duo puts both heights in one box.

    What is in the box?

    An upper plate and an Omni Pivot Base per height, two Omni GlueJet™ tools and GripMag™ 50. The TrueZero™ calibrator file and the CAD libraries download from the DACOS Hub.

    What else do I need?

    A resin 3D printer and resin, a low-viscosity cyanoacrylate for the model magnets, plaster and silicone for the one-time installation, and a CAD software: exocad, 3Shape or Blender for Dental.

    Which CAD software does it work with?

    CAD libraries for exocad and 3Shape are included. For Blender for Dental, the module is sold by Blender for Dental.

    What does TrueZero™ calibration do?

    You print the TrueZero™ calibrator once on your own printer and resin. It tunes the fit of the printed models to your setup, so the pin returns to zero on your bench.

    What if the pin does not return to zero?

    Open a TrueZero™ Verification case and we work through it with you. Damaged, defective or wrong items: write to us within 7 days of delivery.

    When does it ship?

    The Panadent kit is coming soon: shipping is expected in January 2027. Pre-order it now: you pay at checkout, as with any order, and we email you when your order leaves Italy, fully tracked. Prices are shown without VAT; in the EU the VAT of your country is added at checkout.

    Completes your setup

    Parts and tools for the same system. Nothing here is required to start.

    Your cart

    Find your kit